STEP BY STEP GENERAL INSTRUCTONS

• Rinse vehicle / equipment using cold water.
• Fill Foam Cannon Container with ProLine's Truck and Tractor Wash.
• Set the Foam Cannon Metering Dial to 2.5 to 3 for Light Use. Adjust as needed.
• Attach the Foam Cannon to the Pressure Washer.
• Apply Detergent in a horizontal fashion from bottom to top.
• Let sit but do not allow to dry.
• Turn the Metering Dial to Zero and pull the Trigger Gun for a few seconds to flush the Foam Cannon.
• Rinse well under high pressure (works best with hot water), taking care to cover every inch of surface in a systematic pattern from bottom to top.
• Finish by rinsing quickly from top to bottom.